| Power supply voltage | 100 to 240V AC 50/60Hz | |||
|---|---|---|---|---|
| Power consumption | 300VA (Entry cuurent 60Atyp (20ms)) | |||
| Current capacity | 1.5A (200V) | |||
| Mass | 6kg | |||
| Environment | Operating ambient temperature | 0 to +50°C | ||
| Operating ambient humidity | 35 to 85%RH (no condensation) | |||
| Vibration resistance | 3.5mm, 1G, 3 to 150Hz, 3 directions (for one hour) | |||
| Power source noise | 2kV, normal mode, pulse width of common mode 50 nS, 1 uS (depends on the noise simulator) |
|||
| Operating ambient atmosphere | Place free from water droplets, inflammable gas, corrosive gas, corrosive gas, and dust | |||
| Rated tension | 10～10000N | |||
| Tension sensors that can be connected to the TC920V | MB, MG, MC, CD, MJ, CJ, TSA, and intrinsically safe TSA tension sensors. | |||
| Output | Output for measurement | Tension value voltage output (0 to 10VFS (1 mA or less)) Current output for tension value meter (0 to 1mA/FS) |
||
| External setting power supply | 0 to 10V (1 mA or less), 4 to 20mA (470Ω or less) 0 to 24V (4A or less) |
|||
| Power supply for external setting | Power supply for external setting | |||
| Contact output | Zero tension output Minimum diameter output Automatic control output |
Number of outputs, 3 (DC30V 0.2A, AC200V 0.2A) |
||
| Input | Sensor input | •MG tension sensor •MB tension sensor •MC tension sensor •CD tension sensor •MJ tension sensor •CJ tension sensor •TSA tension sensor |
||
| Analog input | •External tension setting •External manual tension setting |
A number of inputs, 2 (0 to 5V, input impedance 100kΩ） | ||
| •Analog diameter (for Taper and Start level) •New spindle deameter (for splicer) •External start level setting •External taper rate |
A number of inputs, 4 (0 to 10V, input impedance 100kΩ） | |||
| Contact input | •Automatic •Memory reset •Accelerate/decelerate •Splice •Output on •Emergency stop, external automatic / manual or accelerate •Diameter calculation reset •Diameter calculation hold |
A number of inputs, 8 (12V DC, 12mA) | ||
| Pulse generator Gate generator | Detection for speed and diameter | 12V DC | ||
