Technical specifications
Measurement / control system | |
---|---|
Flow range, based on N2 (intermediate ranges available) |
min. 8…400 m3n/h max. 80…4000 m3n/h |
Accuracy (incl. linearity) |
±1% FS |
Turndown | 1:50 |
Multi fluid capability |
storage of max. 8 calibration curves |
Repeatability | < 0,2% Rd |
Response time |
typical: 0,5 seconds |
Operating temperature | -10…+70°C; for ATEX cat. 3 and FM Class 1 Div 2 : 0…50°C |
Temperature sensitivity | zero: < 0,05% FS/°C; span: < 0,05% Rd/°C |
Pressure sensitivity | 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2 |
Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
Attitude sensitivity | max. error at 90° off horizontal 0,2% FS at 1 bar, typical N2 |
Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
Mechanical parts | |
---|---|
Material (wetted parts) | stainless steel 316L or comparable |
Pressure rating | up to 40 bar abs (PN10, 16, 40); for hazardous gases such as O2, H2, etc. do not exceed operating pressure of 10 bar; for higher pressure select a flanged type MFM, series F-107/F-117. |
Process connections | Wafer type, for mounting between flanges according to DIN DN150 or ANSI 6” |
Seals | standard: Viton®; options: EPDM, Kalrez® (FFKM) |
Weight | 13,3 kg |
Ingress protection (housing) | IP65 |
Electrical properties | |||
---|---|---|---|
Power supply | +15…24 Vdc | ||
Max. power consumption | Supply 15 V 24 V |
at voltage I/O 95 mA 65 mA |
at current I/O 125 mA 85 mA |
PROFIBUS DP | add 53 mA (15 V supply) or 30 mA (24 V supply) | ||
DeviceNet™ | add 48 mA (24 V supply) | ||
Analog output/command | 0...5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||
Digital communication | standard: RS232; options: PROFIBUS DP, PROFINET, DeviceNet™, Modbus RTU or ASCII, FLOW-BUS |
Electrical connection | |
---|---|
Analog/RS232 | 8 DIN (male); |
PROFIBUS DP | bus: 5-pin M12 (female); power: 8 DIN (male); |
PROFINET | bus: 2 x 5-pin M12 (female) (in/out); power: 8 DIN (male); |
Devicenet™ | 5-pin M12 (male); |
FLOW-BUS/Modbus-RTU/ASCII | 5-pin M12 (male) |