Tiếng Việt
English
Danh mục sản phẩm
-
Medenus Việt Nam
-
Okazaki Việt Nam
-
Schenck Process Việt Nam
-
Mark10 Việt Nam
-
AT2E Việt Nam
-
Nireco Việt Nam
- Hệ thống điều khiển canh tâm CPC trong ngành thép
- Hệ thống kiểm tra chất lượng in bao bì
- Hệ thống điều khiển canh biên EPC trong nghành thép
- Hệ thống ghi chữ tự động trong nghành thép
- Thiệt bị đo
- Hệ thống điều khiển lực căng trong ngành giấy & bao bì
- Hệ thống điều khiển canh biên EPC trong ngành giấy & bao bì
-
Redlion Việt Nam
-
IBA Việt Nam
-
Gastron Việt Nam
-
Matsushima Việt Nam
-
TDK Lambda Việt Nam
-
Keller Việt Nam
-
Lapar Việt Nam
-
Knick Việt Nam
-
CEIA Việt Nam
-
CS Instruments Việt Nam
-
Sitec-components Việt Nam
-
CEMB Việt Nam
-
Koganei Việt Nam
-
GEMU Việt Nam
-
Kometer Việt Nam
-
Comet Việt Nam
-
Spohn Burkhardt Việt Nam
-
Logika Việt Nam
-
Ohkura Việt Nam
-
Bronkhorst Việt Nam
-
Fox Thermal Instrument Việt Nam
-
Aira Việt Nam
-
Ashcroft Việt Nam
-
Fotoelektrik Pauly VietNam
-
Brook Instrument VietNam
-
Fireye VietNam
Hỗ trợ trực tuyến
VIDEO
Chi tiết sản phẩm
-
Biến tần Altivar ATV21HD55N4 Schneider
- Mã SP:
- Giá : Liên hệ
-
Mã sản phẩm:ATV21HD55N4
Xuất sứ:Pháp
Liên hệ tư vấn: 0917.943.068
Email: chien@tmpvietnam.comCông Ty TNHH và DV Tăng Minh Phát là nhà phân phối chính thức của hãng Schneider-Electric tại việt nam, chuyên cung cấp các thiết bị đo lường hãng Schneider-Electric tại Việt Nam,Schneider-Electric Việt Nam
Biến tần Altivar ATV21HD55N4
Thông số kỹ thuật biến tần Altivar ATV21HD55N4
| range of product |
Altivar 21
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| product destination |
Asynchronous motors
|
|
| product specific application |
Pumps and fans in HVAC
|
|
| assembly style |
With heat sink
|
|
| component name |
ATV21
|
|
| EMC filter |
Class A EMC filter integrated
|
|
| power supply voltage |
380...480 V - 15...10 %
|
|
| network number of phases |
3 phases
|
|
| motor power kW |
55 kW
|
|
| motor power hp |
75 hp
|
|
| line current |
89 A at 480 V
102.7 A at 380 V |
|
| speed range |
1…10
|
|
| transient overtorque |
120 % of nominal motor torque +/- 10 % for 60 s
|
|
| asynchronous motor control profile |
Current flux vector control (FVC) without speed feedback
Constant voltage/frequency ratio Quadratic voltage/frequency ratio Constant voltage/frequency ratio with automatic IR compensation Energy saving ratio |
|
| communication port protocol |
Modbus
|
|
| type of polarization |
No impedance
|
|
| IP degree of protection |
IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529
IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1 IP21 conforming to EN/IEC 60529 IP21 conforming to EN/IEC 61800-5-1 IP41 on upper part conforming to EN/IEC 60529 IP41 on upper part conforming to EN/IEC 61800-5-1 |
|
| option card |
Communication card for APOGEE FLN
Communication card for BACnet Communication card for LonWorks Communication card for METASYS N2 |
| power supply voltage limits |
323…528 V
|
|
|---|---|---|
| power supply frequency |
50...60 Hz - 5...5 %
|
|
| power supply frequency limits |
47.5…63 Hz
|
|
| apparent power |
76.3 kVA at 380 V
|
|
| maximum prospective line Isc |
22 kA
|
|
| maximum continuous output current |
116 A at 380 V
116 A at 460 V |
|
| maximum transient current |
127.6 A for 60 s
|
|
| speed drive output frequency |
0.5…200 Hz
|
|
| nominal switching frequency |
8 kHz
|
|
| switching frequency |
6...16 kHz adjustable
8...16 kHz with derating factor |
|
| speed accuracy |
+/- 10 % of nominal slip for 0.2 Tn to Tn torque variation
|
|
| torque accuracy |
+/- 15 %
|
|
| regulation loop |
Adjustable PI regulator
|
|
| motor slip compensation |
Automatic whatever the load
Adjustable Not available in voltage/frequency ratio motor control |
|
| diagnostic |
1 LED (red)DC bus energized:
|
|
| output voltage |
<= power supply voltage
|
|
| insulation |
Electrical between power and control
|
|
| recommended type of cable for mounting in an enclosure |
With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR |
|
| electrical connection |
VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14
L1/R, L2/S, L3/T: terminal 150 mm² (300 kcmil) |
|
| tightening torque |
0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
41 N.m, 360 lb.in (L1/R, L2/S, L3/T) |
|
| supply |
Internal supply: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
|
| analogue input number |
2
|
|
| analogue input type |
VIA switch-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits |
|
| sampling duration |
F 2 ms +/- 0.5 ms for discrete input(s)
R 2 ms +/- 0.5 ms for discrete input(s) RES 2 ms +/- 0.5 ms for discrete input(s) VIA 2 ms +/- 0.5 ms for analog input(s) VIB 2 ms +/- 0.5 ms for analog input(s) |
|
| response time |
FLA, FLC 7 ms +/- 0.5 ms for discrete output(s)
FLB, FLC 7 ms +/- 0.5 ms for discrete output(s) FM 2 ms +/- 0.5 ms for analog output(s) RY, RC 7 ms +/- 0.5 ms for discrete output(s) |
|
| accuracy |
+/- 1 % (FM) for a temperature variation 60 °C
+/- 0.6 % (VIA) for a temperature variation 60 °C +/- 0.6 % (VIB) for a temperature variation 60 °C |
|
| linearity error |
FM: +/- 0.2 % for output
VIA: +/- 0.15 % of maximum value for input VIB: +/- 0.15 % of maximum value for input |
|
| analogue output number |
1
|
|
| analogue output type |
FM switch-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits
FM switch-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits |
|
| discrete output number |
2
|
|
| discrete output type |
Configurable relay logic: (FLA, FLC) NO - 100000 cycles
Configurable relay logic: (FLB, FLC) NC - 100000 cycles Configurable relay logic: (RY, RC) NO - 100000 cycles |
|
| minimum switching current |
3 mA at 24 V DC for configurable relay logic
|
|
| maximum switching current |
2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R) 5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R) |
|
| discrete input type |
F programmable 24 V DC, with level 1 PLC, impedance: 3500 Ohm
R programmable 24 V DC, with level 1 PLC, impedance: 3500 Ohm RES programmable 24 V DC, with level 1 PLC, impedance: 3500 Ohm |
|
| discrete input logic |
Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)
Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1) |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01 to 3200 s
Automatic based on the load |
|
| braking to standstill |
By DC injection
|
|
| protection type |
Against input phase loss: drive
Break on the control circuit: drive Input phase breaks: drive Line supply overvoltage and undervoltage: drive Line supply undervoltage: drive Overcurrent between output phases and earth: drive Overheating protection: drive Overvoltages on the DC bus: drive Short-circuit between motor phases: drive Thermal power stage: drive Motor phase break: motor Thermal protection: motor With PTC probes: motor Against exceeding limit speed: drive |
|
| insulation resistance |
>= 1 mOhm 500 V DC for 1 minute
|
|
| frequency resolution |
Analog input: 0.024/50 Hz
Display unit: 0.1 Hz |
|
| connector type |
1 RJ45
|
|
| physical interface |
2-wire RS 485
|
|
| transmission frame |
RTU
|
|
| transmission rate |
9600 bps or 19200 bps
|
|
| data format |
8 bits, 1 stop, odd even or no configurable parity
|
|
| number of addresses |
1…247
|
|
| communication service |
Monitoring inhibitable
Write multiple registers (16) 2 words maximum Read holding registers (03) 2 words maximum Read device identification (43) Time out setting from 0.1 to 100 s Write single register (06) |
|
| marking |
CE
|
|
| operating position |
Vertical +/- 10 degree
|
|
| height |
630 mm
|
|
| width |
320 mm
|
|
| depth |
290 mm
|
| noise level |
63.7 dB conforming to 86/188/EEC
|
|
|---|---|---|
| dielectric strength |
3535 V DC between earth and power terminals
5092 V DC between control and power terminals |
|
| electromagnetic compatibility |
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
