Danh mục sản phẩm
Hỗ trợ trực tuyến
VIDEO
Chi tiết sản phẩm
-
Biến tần Altivar ATV11HU05M3A Schneider
- Mã SP:
- Giá : Liên hệ
-
Mã sản phẩm:ATV11HU05M2A
Xuất sứ: Pháp
Liên hệ tư vấn: 0917.943.068
Email: chien@tmpvietnam.comCông Ty TNHH và DV Tăng Minh Phát là nhà phân phối chính thức của hãng Schneider-Electric tại việt nam, chuyên cung cấp các thiết bị đo lường hãng Schneider-Electric tại Việt Nam,Schneider-Electric Việt Nam
Biến tần Altivar ATV11HU05M3A
Thông số kỹ thuật biến tần Altivar ATV11HU05M3A
range of product |
Altivar
|
|
---|---|---|
product or component type |
Variable speed drive
|
|
product specific application |
Simple machine
|
|
component name |
ATV11
|
|
application market |
Asia
|
|
assembly style |
With heat sink
|
|
EMC filter |
Without EMC filter
|
|
built-in fan |
Without
|
|
network number of phases |
3 phases
|
|
[Us] rated supply voltage |
200...230 V - 15...10 %
|
|
supply frequency |
50...60 Hz - 5...5 %
|
|
motor power kW |
0.18 kW
|
|
line current |
1.8 A at 200 V, Isc = 1 kA
|
|
nominal output current |
1.4 A 230 V motor 4 kHz
|
|
maximum transient current |
2.1 A for 60 s
|
|
power dissipation in W |
13.5 W at nominal load
|
|
switching frequency |
2...16 kHz adjustable
4...16 kHz with derating factor |
|
braking torque |
150 % of nominal motor torque with braking resistor at high inertia
20 % of nominal motor torque without braking resistor at no load 80 % of nominal motor torque with braking resistor at no load |
|
asynchronous motor control profile |
Sensorless flux vector control with PWM type motor control signal
|
|
electrical connection |
Terminal, clamping capacity: 1.5 mm², AWG 14 (AI1, RA-RC, LI1...LI4, DO)
Terminal, clamping capacity: 1.5 mm², AWG 14 (L1, L2, L3, U, V, W, PA, PC) |
|
supply |
Internal supply for logic inputs: 15 V (+/- 15 %) 100 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm): 5...5.25 VDC 10 mA, protection type: overload and short-circuit protection |
|
analogue input type |
Configurable current AI1 4...20 mA 250 Ohm without adding resistor
Configurable voltage AI1 0...5 V 40000 Ohm only with internal supply Configurable current AI1 0...20 mA 250 Ohm Configurable voltage AI1 0...10 V 40000 Ohm |
|
sampling duration |
AI1: 20 ms analog
LI1...LI4: 20 ms discrete |
|
response time |
20 ms DO
|
|
linearity error |
DO: +/- 1 % for output
AI: +/- 5 % for input |
|
discrete input type |
Assignable Ll1 forward 5000 Ohm 15 V 24 V
Assignable Ll2 reverse 5000 Ohm 15 V 24 V Assignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V |
|
discrete input logic |
Positive logic (source) (LI1...LI4), < 5 V (state 0), > 11 V (state 1)
Logic input not wired (LI1...LI4), < 5 V (state 1) Negative logic (source) (LI1...LI4), > 11 V (state 0) |
|
discrete output type |
Assignable as external voltage DO 30 V max, 30 mA
Assignable as open collector logic output DO 100 Ohm, 50 mA max Factory set as PWM open collector output DO at 2 kHz 10 mA max Protected relay logic RA-RC 1 NO Assignable as internal voltage DO |
|
minimum switching current |
RA-RC 10 mA at 24 V DC
|
|
maximum switching current |
2 A 250 V AC inductive cos phi = 0.4 7 ms RA-RC
2 A 30 V DC inductive cos phi = 0.4 7 ms RA-RC 5 A 250 V AC resistive cos phi = 1 RA-RC 5 A 30 V DC resistive cos phi = 1 RA-RC |
|
protection type |
Line supply overvoltage: drive
Line supply undervoltage: drive Overcurrent between output phases and earth: drive Overheating protection: drive Short-circuit between motor phases: drive Thermal protection: motor |
|
frequency resolution |
Display unit: 0.1 Hz
Analog input: converter A/D, 10 bits |
|
electromagnetic compatibility |
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to EN/IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3 |
|
maximum motor cable length |
20 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class A group 1
5 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class B |
|
vibration resistance |
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
|
shock resistance |
15 gn for 11 ms conforming to EN/IEC 60068-2-27
|
|
relative humidity |
5…93 % without condensation conforming to IEC 60068-2-3
5…93 % without dripping water conforming to IEC 60068-2-3 |
|
ambient air temperature for operation |
-10…40 °C without
40…50 °C by removing the protective cover from the top of the drive 50…60 °C by removing the protective cover from the top of the drive with current derating of 2.2 % per °C |
|
operating altitude |
<= 1000 m without
> 1000 m with current derating 1 % per 100 m |
product destination |
Asynchronous motors
|
|
---|---|---|
supply voltage limits |
170…253 V
|
|
network frequency limits |
47.5…63 Hz
|
|
speed drive output frequency |
0…200 Hz
|
|
nominal switching frequency |
4 kHz
|
|
speed range |
1…20
|
|
transient overtorque |
150...170 % of nominal motor torque
|
|
regulation loop |
Factory-set with the speed loop stability and gain
Adjustable frequency Possible correction for machines with high resistive torque/inertia/fast cycles |
|
motor slip compensation |
Preset in factory
Adjustable |
|
prospective line Isc |
1 kA
|
|
output voltage |
<= 2 x power supply voltage
|
|
insulation |
Electrical between power and control
|
|
analogue input number |
1
|
|
discrete input number |
4
|
|
discrete output number |
2
|
|
acceleration and deceleration ramps |
Linear from 0 to 99.9 s
|
|
braking to standstill |
By DC injection
|
|
insulation resistance |
> 500 MOhm
|
|
marking |
CE
|
|
operating position |
Vertical +/- 10 degree
|
|
CAD overall width |
72 mm
|
|
CAD overall height |
142 mm
|
|
CAD overall depth |
108 mm
|
|
net weight |
0.9 kg
|
standards |
EN 50178
|
|
---|---|---|
product certifications |
UL
CSA N998 C-Tick |
|
IP degree of protection |
IP20
|
|
ambient air temperature for storage |
-25…65 °C
|