Danh mục sản phẩm

Hỗ trợ trực tuyến

icon hotline


Hỗ trợ online

Icon điện thoại 0917.943.068

Icon email chien@tmpvietnam.com


Chi tiết sản phẩm

  • Cảm biến canh tâm EMW Nireco

  • Mã SP:
  • Giá : Liên hệ
  • Overview

    New Concept--- Detection by Electromagnetic Wave.

    The furnace can operate safely because there is no need for sensors or other structures inside it.

    Electromagnetic CPC sensors are new kind of sensor. They emit electromagnetic waves from antennae embedded in the furnace wall and use the transmission time taken for the waves reflected from the strip edges to return to the antennae to measure the strip position.

Carrier frequency 10GHz
Measurement range 40mm to 1200mm
Linearity ±1mm or less
Reproducibility ±1mm or less
Resolution Pyramidal horn antenna
Minimum strip thickness 12μm
Antennae Pyramidal horn antennae
Installation aperture 280mm × 170mm
Cooling Antenna N2 Q = 50Nl / min , P = 7KPa
Connector AIR Q =120Nl / min , P = 0.14MPa
Ambient operating temperature 1,350℃ (max)
Radar amplifier Wall mounted
Power supply 85 to 264VAC, 50/60Hz, 300VA
Cooling AIR Q = 600Nl / min , P = 0.6MPa
Ambient operating temperature 0℃ to 70℃
Microwave cable Special type L=10m (max 200℃)
Radar amplifier output DS edge position: Zero-span/4-20mA
WS edge position: Zero-span/4-20mA
ISO output, allowable load resistance 750Ω or less
Warning outputs Open collector output 24VDC / 40mA
Trigger error
Level error
Roll out

Sản phẩm cùng loại